Xcellon-Lava 40/100 GE load module

ꄴPrevious： 100/50/25 GbE Load Modules
ꄲNext： null


Xcellon-Lava

Dual-Speed, 40/100GE Higher Speed Ethernet Load Modules with CFP and QSFP Interfaces

Product Menu

Xcellon-Lava 40/100 Gigabit Ethernet Test Module is Ixia's next generation of Ultra High Speed Ethernet (HSE) products. They combine the advantages of Xcellon architecture and provide the highest 40GE and 100GE port densities. Xcellon-Lava is a 1-7-tier measurement and analysis test solution supported by Ixia's leading test applications, including IxNetwork and IxLoad.

There are two types of solutions:

  • Xcellon-Lava 40/100 GE Acceleration Performance Module for 1-7 Layer Testing

  • Xcellon-Lava 40/100 GE only data layer modules-an economical alternative to accelerated performance load modules. This module is very suitable for testing 1-3 layer functions that do not require routing protocol simulation.

Xcellon-Lava module is very suitable for testing high-density 40GE/100GE data center network equipment for large enterprises, service providers and telecom-grade networks. Xcellon-Lava Load Module and Ixia XG12™, XM chassis series are compatible with various Ethernet interfaces, and real 1-7 layer testing and measurement can be realized in one chassis.


Specifications:



(active tab)

  • characteristicsTwo-speed 40/100GETwo-speed 40/100GE
    Acceleration performance moduleOnly data layer modules
    Model nameLavaAP40/100GE2PLavaAP40/100GE2RP
    Number of ports per moduleTwo 100GE CFP MSA ports
    Two CFP MSA ports or four 40GE QSFP ports (with interface adapter)
    The number of chassis slots for each module1
    The maximum number of ports per chassis:
    • XG1224 100GE CFP MSA ports and 48 40GE QSFP ports
    • XM1220 100GE CFP MSA ports and 40 40GE QSFP ports
    • XM2 DesktopTwo 100GE CFP MSA ports and four 40GE QSFP ports
    Transceiver Support• CFP MSA 1.4, pluggable
    • SFF-8436 QSFP, pluggable, fiber/copper cable (passive/active) with adapter
    CFP interface adapter• 1 port CFP to QSFP adapter for 40GE operation
    • 2-port CFP to QSFP adapter for 40GE operation
    • 1 port CFP to CXP adapter for 100GE operation
    The hardware capture buffer for each port.1.4GB
    Interface protocol40 Gigabit Ethernet 40GBASE-R (according to IEEE802.3ba-20120 standard)
    • 100 Gigabit Ethernet 100GBASE-R (according to IEEE802.3ba-20120 standard)
    Layer 2/3 routing protocol simulationcovers routing, MPLS, VPLS, high availability, IP multicast, switching, and telecom Ethernet.
    Layer 4-7 Application Traffic Testsupportis not supported.
    statistics and rate (counter size: 64 bits)link status, line speed, transmitted frames, valid frames received, transmitted/received bytes, fragments, too small, too large, CRC error, VLAN flag frames, 6 user-defined statistics, capture trigger (UDS 3), capture filter (UDS 4), user-defined statistics 5, user-defined statistics 6, 8 QoS counters, data integrity frames, data integrity error, sequence check frame, sequence check error, ARP and ping request and response
    delay measurement resolution2.5 nanoseconds, compatible with all 10GbE and 1GbE optical fibers of Ixia and Packet over SONET load modules on 10/100/1000Mbps Ethernet, ATM and SONET
    delayed self-calibrationcan calibrate and eliminate the inherent delay from any MSA-compliant 40GE or 100GE CFP or QSFP SFF-8436 transceiver
    MDIOMDIO v1.4 support for CFP MSA transceivers
    Layer 1 BERT capabilityload module supports the following BERT functions at 40 GE and 100 GE speeds:
    • The PRBS code type selected for each PCS channel
    The user can select the code type to be transmitted (true complement code) from a variety of PRBS data codes, and can convert the code type
    Send exponentially controlled continuous single batch of error injections
    provides a variety of statistical data, including: pattern lock, transmitted pattern, received pattern, total number of bits sent and received, total number of errors sent and received, bit error rate (BER), number of mismatched 1 and 0.
    Based on the physical media correlation sublayer (PMD) defined by IEEE 802.3ba, channel statistics are grouped by SMF and MMF 40GE and 100GE lambda.
    40/100 GE Physical Coding Sublayer (PCS) Test Function:PCS transmission and receiver testing capabilities conforming to IEEE 802.3ba.

Xcellon-Lava 40/100 Gigabit Ethernet Test Module is Ixia's next generation of Ultra High Speed Ethernet (HSE) products. They combine the advantages of Xcellon architecture and provide the highest 40GE and 100GE port densities. Xcellon-Lava is a 1-7-tier measurement and analysis test solution supported by Ixia's leading test applications, including IxNetwork and IxLoad.

There are two types of solutions:

  • Xcellon-Lava 40/100 GE Acceleration Performance Module for 1-7 Layer Testing

  • Xcellon-Lava 40/100 GE only data layer modules-an economical alternative to accelerated performance load modules. This module is very suitable for testing 1-3 layer functions that do not require routing protocol simulation.

Xcellon-Lava module is very suitable for testing high-density 40GE/100GE data center network equipment for large enterprises, service providers and telecom-grade networks. Xcellon-Lava Load Module and Ixia XG12™, XM chassis series are compatible with various Ethernet interfaces, and real 1-7 layer testing and measurement can be realized in one chassis.




Ordering:

  • (active tab)

Xcellon-Lava 40/100 Gigabit Ethernet Test Module is Ixia's next generation of Ultra High Speed Ethernet (HSE) products. They combine the advantages of Xcellon architecture and provide the highest 40GE and 100GE port densities. Xcellon-Lava is a 1-7-tier measurement and analysis test solution supported by Ixia's leading test applications, including IxNetwork and IxLoad.

There are two types of solutions:

  • Xcellon-Lava 40/100 GE Acceleration Performance Module for 1-7 Layer Testing

  • Xcellon-Lava 40/100 GE only data layer modules-an economical alternative to accelerated performance load modules. This module is very suitable for testing 1-3 layer functions that do not require routing protocol simulation.

Xcellon-Lava module is very suitable for testing high-density 40GE/100GE data center network equipment for large enterprises, service providers and telecom-grade networks. Xcellon-Lava Load Module and Ixia XG12™, XM chassis series are compatible with various Ethernet interfaces, and real 1-7 layer testing and measurement can be realized in one chassis.

characteristics

Two-speed 40/100GE

Acceleration performance module

Two-speed 40/100GE

Only data layer modules

Model name

LavaAP40/100GE2P

LavaAP40/100GE2RP

Number of ports per module

Two 100GE CFP MSA ports

Two CFP MSA ports or four 40GE QSFP ports (with interface adapter)

The number of chassis slots for each module

1

The maximum number of ports per chassis:

• XG12

• XM12

• XM2 Desktop

24 100GE CFP MSA ports and 48 40GE QSFP ports

20 100GE CFP MSA ports and 40 40GE QSFP ports

Two 100GE CFP MSA ports and four 40GE QSFP ports

Transceiver Support

• CFP MSA 1.4, pluggable

• SFF-8436 QSFP, pluggable, fiber/copper cable (passive/active) with adapter

CFP interface adapter

• 1 port CFP to QSFP adapter for 40GE operation

• 2-port CFP to QSFP adapter for 40GE operation

• 1 port CFP to CXP adapter for 100GE operation

The hardware capture buffer for each port.

1.4GB

Interface protocol

40 Gigabit Ethernet 40GBASE-R (according to IEEE802.3ba-20120 standard)

• 100 Gigabit Ethernet 100GBASE-R (according to IEEE802.3ba-20120 standard)

Layer 2/3 routing protocol simulation

covers routing, MPLS, VPLS, high availability, IP multicast, switching, and telecom Ethernet.

Layer 4-7 Application Traffic Test

support

is not supported.

statistics and rate (counter size: 64 bits)

link status, line speed, transmitted frames, valid frames received, transmitted/received bytes, fragments, too small, too large, CRC error, VLAN flag frames, 6 user-defined statistics, capture trigger (UDS 3), capture filter (UDS 4), user-defined statistics 5, user-defined statistics 6, 8 QoS counters, data integrity frames, data integrity error, sequence check frame, sequence check error, ARP and ping request and response

delay measurement resolution

2.5 nanoseconds, compatible with all 10GbE and 1GbE optical fibers of Ixia and Packet over SONET load modules on 10/100/1000Mbps Ethernet, ATM and SONET

delayed self-calibration

can calibrate and eliminate the inherent delay from any MSA-compliant 40GE or 100GE CFP or QSFP SFF-8436 transceiver

MDIO

MDIO v1.4 support for CFP MSA transceivers

Layer 1 BERT capability

load module supports the following BERT functions at 40 GE and 100 GE speeds:

• The PRBS code type selected for each PCS channel

The user can select the code type to be transmitted (true complement code) from a variety of PRBS data codes, and can convert the code type

Send exponentially controlled continuous single batch of error injections

provides a variety of statistical data, including: pattern lock, transmitted pattern, received pattern, total number of bits sent and received, total number of errors sent and received, bit error rate (BER), number of mismatched 1 and 0.

Based on the physical media correlation sublayer (PMD) defined by IEEE 802.3ba, channel statistics are grouped by SMF and MMF 40GE and 100GE lambda.

40/100 GE Physical Coding Sublayer (PCS) Test Function:

PCS transmission and receiver testing capabilities conforming to IEEE 802.3ba.

Xcellon-Lava Higher Speed Ethernet products:

944-1074
Xcellon-Lava AP40/100GE2P-NG FUSION-enabled40/100 Gigabit Ethernet Accelerated Performance, dual-speed, load module, 2-ports, 1-slot with CFP MSA interfaces and full performance L2-7 support. NOTE: If XM12 chassis is used with this load module, the Field-Replaceable XM12 power supply upgrade kit (943-0005) must be installed.

944-1097
FUSION Upgrade OptionFactory Upgrade, for XCELLON-LAVAAP40/100GE2P (941-1067)

944-1067
Xcellon-Lava AP 40/100GE dual-speed, load moduleLava AP40/100GE2P, 40/100 Gigabit Ethernet Accelerated Performance, dual-speed, load module, 2-ports, 1-slot with CFP MSA interfaces and full featured L1-7 support. NOTE: If XM12-01 (941-0002) chassis is used with this load module, the FRU-OPTIXIAXM12-01 (943-0005) power supply upgrade kit must be installed.

944-1068
Xcellon-Lava 40/100GE2RP dual-speed, load moduleLava 40/100GE2RP, 40/100 Gigabit Ethernet Reduced Performance, dual-speed, load module, 2-ports, 1-slot with CFP MSA interfaces and full featured L1-3 data plane support and up to 100 routing protocol emulations per port . NOTE: If XM12-01 (941-0002) chassis is used with this load module, the FRU-OPTIXIAXM12-01 (943-0005) power supply upgrade kit must be installed.

948-0023

CFP-to-QSFP Dual Interface Adapter ModuleCFP-to-QSFP Dual-Port Interface Adapter Module. A pluggable, 2-port unit that converts an Ixia Xcellon-Lava CFP MSA port interface to 2-ports of pluggable 40GE QSFP for fiber or copper cable assemblies or standalone transceivers. The adapter is compatible with the Xcellon-Lava 40/100-Gigabit Ethernet, Accelerated Performance, load modules (944-1067 & 944-1074) and Xcellon-Lava 40/100-Gigabit Ethernet, Reduced Performance, load module (944-1068). These load modules accept up to two of the Dual Interface Adapter Modules.

948-0022
CFP-to-QSFP Interface Adapter ModuleCFP-to-QSFP Interface Adapter Module. A pluggable unit that converts an Ixia CFP MSA port interface to 1-port of the pluggable 40GE QSFP for multimode fiber or copper cable assemblies or standalone transceivers. The adapter is compatible with the HSE40GETSP1-01, 40-Gigabit Ethernet load module (944-0069), HSE40/100GETSP1-01, 40/100-Gigabit Ethernet, dual-speed, load module (944-0091), HSE40/100GETSPR1-01, 40/100-Gigabit Ethernet, dual-speed, Data Plane Ethernet load module (944-0099), Xcellon-Lava 40/100-Gigabit Ethernet, Accelerated Performance, load modules (944-1067 & 944-1074) and Xcellon-Lava 40/100-Gigabit Ethernet, Reduced Performance load module (944-1068).

948-0027
CFP-to-CXP Interface Adapter ModuleCFP-to-CXP Interface Adapter Module. A pluggable unit that converts an Ixia CFP MSA port interface to 1-port of the pluggable 100GE CXP for multimode fiber or copper cable assemblies or standalone transceivers. The adapter is compatible with the HSE100GETSP1-01 100- Gigabit Ethernet load module (944-0070), HSE40/100GETSP1-01, 40/100-Gigabit Ethernet, dual-speed, load module (944-0091), HSE40/100GETSPR1-01, 40/100-Gigabit Ethernet, dual-speed, Data Plane load module (944-0099), Xcellon-Lava 40/100-Gigabit Ethernet, Accelerated Performance, load modules (944-1067 & 944-1074) and the Xcellon-Lava 40/100-Gigabit Ethernet, Reduced Performance load module (944-1068).

948-0029
CFP-to-QSFP28 Interface Adapter ModuleCFP-to-QSFP28 Interface Adapter Module. A pluggable, 1-port unit that converts an Ixia Xcellon-Lava CFP MSA port interface to 1-port of 100GE QSFP28. This adapter supports 100GE multimode fiber optical transceiver or Active Optical Cable (AOC) media only. The adapter is compatible with the Xcellon-Lava 40/100-Gigabit Ethernet, Accelerated Performance, load module (944-1067) and Xcellon-Lava 40/100-Gigabit Ethernet, Reduced Performance, load module (944-1068). Both load modules accept up to two of the QSFP28 Interface Adapter Modules.